Showing 1–12 of 28 results

Drives & Fuzz

Warped Plexi

9.90

The Warped Plexi is based on the three knob Version of Wampler’s Plexi Drive ™. Not only one of the Pedals that made Brian Wampler pedal brand famous, it also is one of the best sounding Marshall ™ in a Box pedals out there.  I think there is no need to keep talking about the very British sounding tonal options of this Overdrive. There are plenty awesome demos about it on Youtube.

Drives & Fuzz

Revolution III

11.90

Project overview: Modern high gain drive, that’s what the Revv G3 & G4 ™ pedals are known for. This is your chance to build your own version of this insane preamps in a box. Accurate OpAmps emulations of the purple and the red channel from the Generator tube head. There is no need to tell you how good this things sound. You can find plenty of insane videos on YouTube, if you do not know them yet. After trying it you will find why has been chosen as the best pedal of 2018 by multiple specialized media.

Drives & Fuzz

Wolfgang 5051

11.90

Six gain stages preamp with a lot of attenuation and select filtering between each stage to get the desired frequency and phase response characteristics of the original Peavey EVH 5150 head preamp section.
Features a 3 band tone stack with an additional gain recovery stage.
Even if this PCB is pedal friendly, due the immense amount of output, this beast shines the best as a Preamp on the FX loop.

Drives & Fuzz

Clockwork Orange

11.90

Project overview:
Jfet conversion of the Orange Graphic MKII  ™ that delivers a thick and saturated drive. This project really stands out from the standard Jfet amp emulators due the nature of its schematic, you can find the baxandall eq at the beginning, in between the first and second gain stages, to have total control of your tone before the signal gets saturated. But what makes this project and the original Orange Graphic MKII so interesting is the FAC switch that acts as a high pass filter in between the third and fourth stages, allowing you to do dial your tone in unique ways.

Drives & Fuzz

Solid Metal

11.90

Project overview:
Based on Amptweaker Tight metal. High gain drive, includes an internal noise gate, Tight control and two switches to select different voice modes such as Thrash mode and our mod on the original model that allows you select in between the stock Tight metal, or the “more crunchy less gainy” Tight Rock.

Drives & Fuzz

Ultimate Pharaoh

11.90

Project overview:
The Ultimate Pharaoh is the final evolution of the legendary Pharaoh fuzz by Black arts Toneworks. The Pharaoh has long been known for its plethora of musical fuzz tones that forge a link between your guitar and amp without masking the inherent character of each. This rich legacy of tone has led many guitarists to bow down to the Pharaoh, extending its dynasty across pedalboards the world over. Now the Pharaoh Supreme ascends to the Osirian throne, promising all the tones and sounds of the original Pharaoh and much more

9.90

Project overview:
Based on Walrus Audio Deep Six Compressor with roots on the DynaComp and Ross Compressor. This four knobs beast works great for guitar or bass thanks to the internal trimmer that regulates how much of the signal is feed into the IC. Designed to operate with the IC LM13700 instead of the obsolete CA3080 that most of the compressors use. It’s recommended to operate this circuit at 18v, but remember that all the capacitors should be rated for more than 25V.

Drives & Fuzz

Dirt Device

8.90

Project overview: Clearly a Fuzz Face inspired circuit, but with two interesting features that totally changes the nature of this pedal, a knob for Bias control that regulates how much voltage is fed into the second transitor, and a big muff tone stack just before the output that allows you to shape the tone at taste.

Drives & Fuzz

Volcano Device

9.90

Project overview: The perfect fuzz! According to the people from EQD at Akron, Ohio. This circuit has been designed to have the ultimate classic fuzz tone with a big low end, a biting top end without being too harsh. Inspired on the classic fuzz face face featuring an input buffer and a pickup emulator (transformer). For this project we have included an internal volume trimpot as well as an additional Bias to have more control on the main Bias control outside the box.

Drives & Fuzz

Fuzz Maker II

8.90

The Fuzz maker is one of the most iconic pedals in the DIY community, almost every pedal builder tried at least once to build this classic versatile fuzz!
The Fuzz maker is a great starting point for everyone who want to start building pedals, as well as it’s a must on each player pedalboard. The Fuzz maker is Easy to build and fun to play with!

-25%

Beginner Projects

Beginners’s Pack

34.50 25.90

The Beginner’s Pack is a selection of the best projects for start building your own pedals. Including La Rata Multi-board Acapulco Lite Amazing Booster Angry Carlos Mad Blue Delay Easy-3pdt board x6

-45%

Delay & Modulation

Earthquake Pack

125.70 69.42

Today you can get -40% on the 11 boards set. Save more than 50€! – Get it for just 69,42€! What are you waiting to start building your own pedals? Including: Eagle Claw Ghost Device Tremolo Device Volcano Device Tv Channel, Dual Channel Overdrive Horn Device Sea Device Watchtower (Palisades) Arcade Commander Acapulco lite Acapulco [...]

0

Your Cart