Death by Reverb
€11.90
Project overview:
The Death by Audio Reverberation Machine ™ is for sure the dedicated Belton Brick reverb for sinister lo-if ambient and spherical shimmer sounds. Like all the DBA pedals this is not your normal type of effect. But I’m sure you already know what you are looking at. This is not everybody’s darling, but if you are looking for something outstanding and special without the hustle of using digital parts you will love this one.
In stock
Introduction
The Reverberation Machine is a synthetic atmosphere creator. Use the effect on any instrument to add depth and simulate different environments. Everything from simulations of vintage amp verb, playing in a cave, large concert halls, and space ships being sucked into wormholes.
With just three simple intuitive knobs this pedal allows you to experiment and combine a variety of settings to obtain the perfect ambiance for your sound. Also special mention for the toggle that allows you to switch in between two distinct reverb flavors: Bright Sunshine and Dark Star.
Although the controls are extremely easy to use and intuitive, they allow you to easily dial em up the most crazy and dreamy wet soundscapes.
Let your sound shimmer and breathe with a new dimension. Build your Death By reverb now!
On this giveaway version, the toggle switch must be wired off-board due to the overlapping with the reverb brick. Check on the drilling templates for more information on how to fix it.
Simply place some wires from the switch pads and solder them to the switch offboard.
We are currently working on an updated version not only to solve this issue but also to add some mods that make this pedal way more versatile.
Controls
- Blend
- Gain
- Volume
- Bright/dark Toggle
Death by Reverb building doc
Death by reverb – Drilling 125b
Death by reverb – Drilling 1590bb
For further analysis on this circuit take a look at this thread on Free Stomp Boxes Forum
For anything technical question regarding this build don’t forget to check out our Facebook Group, and our forum at Free Stomp Boxes
Be the first to review “Death by Reverb”
Related products
Delay & Modulation
Project overview:
Based on the EQD Ghost echo, here comes a reverb design that does not require DSP chips and SMD soldering. Build around a PT2399 Chip and a Belton Brick module all sounds between slight rooms and spooking ambient fit on this still beginner friendly While you can get subtle and lovely always on sounds out of this little wonder its main business are ambient sounds, volume swells and haunting Room deflections with only three easy to dial in Knobs. Definitely a ghost summoning device!
Delay & Modulation
Inspired by EQD Sea Machine Project overview: PCB Guitar Mania Sea Device is a chorus pedal that gives you an unprecedented measure of control over its parameters. This digital-analog hybrid circuit gives you standout chorusing effects topped off with dramatic shimmer, based around a PT2399 short digital delay line, with controls for Animation, Dimension, and Depth. From there, knobs for Shape, Rate, and Intensity let you craft and fine-tune your chorus effect to perfection.
Delay & Modulation
Project overview:
Envelope filter based on Mutron Micro V fully moded into a more versatile and easy to build pedal. Fully responsive to your pick attack. Including additional Attack and Decay controls for the envelope response. Featuring an LM13700 in replace of the unobtainable CA3080 in the original circuit.
Delay & Modulation
Chorus/Vibrato Based on the Pirate Pitch Deluxe by Mid-fi electronics. Difficulty level: Intermediate. Ammount of parts: Moderate Availability of componets: Average. All the components are pretty easy to get. Just take special note on that you could use VTL5C2 photocoupler, or make your own with a LDR and Led in front of each other into some heatshrink tube.
Delay & Modulation
Project overview:
PCB Guitar Mania Octopus Platform is a powerful device to run up to 8 different modulation patches (Reverbs, delays, octavers, phasers, pitch shifters, etc) through the powerful Spin FV-1 IC, just by replacing the provided Eeprom memory ICs. This technology is the responsible of feeding crazy projects such as the Earthquaker devices Rainbow Machine, Avalanche Run, and more.
Sale
Project overview:
The Master Phaser is a modern approach to the 70’s Stage Phaser by Maestro. Ready to build using OTA LM13700 instead of the unobtainable CA3094. This board also features the possibility of turn the Phaser into something closer to an Univibe.
Delay & Modulation
Delay Based on Earthquaker devices Disaster Transport Jr. Difficulty level: Intermediate. Ammount of parts: Moderate Availability of componets: Average. I recomend to use a 78L05 on a TO-92 package.
Reviews
There are no reviews yet.